2.5"x19" | 170 gpd | Seawater RO Membrane for Crystal Sea Watermaker | Replaces Sea Recovery 2724020333

AMI 2.5x19" Seawater Desalination Reverse Osmosis Membrane to Replace Sea Recovery 2724020333 For Replacement in Sea Recovery Crystal Sea Reverse Osmosis Desalination Systems Add AMI Membrane Quality to your Existing Seawater Desalination Equipment AMI M-SR2724020333 Seawater RO Membranes can be used as a replacement in Sea Recovery Reverse Osmosis Desalination System Crystal Sea Series with exceptional value and performance benefits. AMI SWRO membranes offer the high rejection and high productivity that is ideal for seawater desalination in shipboard applications, watermakers, land-based desalinators and sea-based desalinators, and are among the finest in the industry. For the past 35 years, AMI Membrane elements have earned the reputation of consistent quality. AMI Membranes are 100% Quality and Performance Tested in their ISO 9001:2015 Certified Facilities. Looking for a replacement seawater desalination membrane element for your watermaker filter system? View our Watermaker Replacement Cross Reference Chart . Benefits of AMI Seawater Membranes for Crystal Sea Desalination Systems: Add AMI Membrane Quality and Value to your Existing Seawater Desalination Equipment Convert seawater into drinking water on yachts, boats, cruise ships, off- shore platforms, and resorts High Rejection Flow Rate Manufactured in ISO 9001:2015 Certified Facilities 100% Performance and Quality Tested High Quality for Consistent and Reliable Performance Uses the most advanced membrane film technology and manufacturing processes Standard dimensions to fit in commonly available housings M-SR2724020333 Specifications AMI Model Number M-SR2724020333 Replaces Membrane Models: Sea Recovery 2724020333 CYCROM CCROMHR25/19HF For use in System Models SRC 170 CS-FE / 12 VDC SRC 170 CS-FE / 24 VDC SRC-CFFE SRC-CSFE-170 For Use in System Series: Sea Recovery Crystal Sea Series For Use in Vessel: Sea Recovery B196090001 2481321000 Size (Approximate): 2.5" Dia. x 19"L Flow Rate: 170 gpd (0.64 m³/d) Applied Pressure: 800 psig (55 bar) Stabilized Salt Rejection: 99.6% Minimize Salt Rejection: 99.4% Exterior: Hard Shell Fiberglass Membrane Type: Polyamide Thin-Film Composite Permeate flow and salt rejection based on 32,000 ppm NaCl feed stream, pressure and recovery listed above. Element Permeate flow may vary +/- 20% Operating Limits for M-SR2724020333 Maximum Operating Temperature: 113°F (45 °C) Maximum Operating Pressure: 1,000 psig (69 bar) Maximum Pressure Drop: 15 psig (1 bar) Maximum Feed Flow Rate: 6 gpm (1.4 m³/h) pH Range, Continuous Operation: 2-11 pH Range, Short-Term Cleaning: 1-13 Maximum Feed Silt Density Index: SDI 5 Free Chlorine Tolerance: 0 Related Products for use with M-SR2724020333 Seawater Elements C-C2510-A11 Membrane Cleaning Cartridge with Acid Cleaner to Remove Scale Buildup and Prolong Membrane Life C-C2510-A22 Membrane Cleaning Cartridge with Alkaline Cleaner to Remove Organics and Prolong Membrane Life C-C2510-A88 Membrane Preservative Cartridge for Preserving the System and Membrane During Extended Periods of Non-Operation. 655139-03 Oil Absorbing Filter Cartridge - Oil-Water Separator Replacement Cartridge, 20" Big Blue Pentair Pentek Filter H-F10100CF Plankton Filter - 10" Standard 100 Micron Spun Polypropylene Replacement Filter Cartridge Common Applications for AMI Seawater Watermaker Elements: Seawater Desalination Marine Applications Watermaker RO Systems Yachts Physical Dimensions of M-SR2724020333 Sea Recovery 2724020333 Crystal Sea Replacement Element INCHES (MM) L 19.0 (483) I 15.6 (396) D 2.25 (57) P 0.625 (16) Replacement Compatibility for 2.5 x 19 Seawater RO Membranes AMI M-SR2724020333 membrane element is intended to be used as a direct replacements for Sea Recovery 2724020333 Seawater Membrane and CYCROM CCROMHR25/19HF - for use in any system using these membrane elements. Some common systems using these elements are Sea Recovery Crystal Sea Series SRC 170 CS-FE / 12 VDC, SRC 170 CS-FE / 24 VDC, SRC-CFFE, SRC-CSFE-170. If you do not see your system listed or wish to learn more about compatibility, please contact us . Our certified water treatment experts will be happy to discuss your application. To ensure prompt and accurate information, please include as much information about your system as possible, such as: model, manufacturer, model of membranes being replaced, any available. product manuals or literature associated with your system, and photographs of your system or membranes.