2.5"x19" | 100 gpd | Seawater RO Membrane for Village Marine Watermaker

AMI 2.5x19" Seawater Desalination Reverse Osmosis Membrane to Replace AquaPro 33-3001 For Replacement in Village Marine Watermaker Systems Add AMI Membrane Quality to your Existing Seawater Desalination Equipment AMI M-S2519A-100 Seawater RO Membranes can be used as replacements in Village Marine Sea Quencher SQ-200 and LIttle Wonder LWM-180 Watermakers with exceptional value and performance benefits. AMI SWRO membranes offer the high rejection and high productivity that is ideal for seawater desalination in shipboard applications, watermakers, land-based desalinators and sea-based desalinators, and are among the finest in the industry. For the past 35 years, AMI Membrane elements have earned the reputation of consistent quality. AMI Membranes are 100% Quality and Performance Tested in their ISO 9001:2015 Certified Facilities. Looking for a replacement seawater desalination membrane element for your watermaker filter system? View our Watermaker Replacement Cross Reference Chart . Benefits of AMI Seawater Membranes for Village Marine Watermakers: Add AMI Membrane Quality and Value to your Existing Seawater Desalination Equipment Convert seawater into drinking water on yachts, boats, cruise ships, off- shore platforms, and resorts High Rejection Flow Rate Manufactured in ISO 9001:2015 Certified Facilities 100% Performance and Quality Tested High Quality for Consistent and Reliable Performance Uses the most advanced membrane film technology and manufacturing processes Standard dimensions to fit in commonly available housings M-S2519A-100 Specifications AMI Model Number M-S2519A-100 Replaces Membrane Models: Village Marine 33-3001 AquaPro 33-3001 Parker Racor 3001 For use in System Models: Sea Quencher SQ-200 Little Wonder LWM-180 90-8549, 90-8561, 90-8550, 90-8512, 90-8596, 90-8516, 90-8515 For Use in Vessel: Parker 32-2519 Village Marine 32-2519 Size (Approximate): 2.5" Dia. x 19"L Flow Rate: 100 gpd (0.37 m³/d) Applied Pressure: 800 psig (55 bar) Stabilized Salt Rejection: 99.6% Minimize Salt Rejection: 99.4% Exterior: Hard Shell Fiberglass Membrane Type: Polyamide Thin-Film Composite Permeate flow and salt rejection based on 32,000 ppm NaCl feed stream, pressure and recovery listed above. Element Permeate flow may vary +/- 20% Operating Limits for M-S2519A-100 Maximum Operating Temperature: 113°F (45 °C) Maximum Operating Pressure: 1,000 psig (69 bar) Maximum Pressure Drop: 15 psig (1 bar) Maximum Feed Flow Rate: 6 gpm (1.4 m³/h) pH Range, Continuous Operation: 2-11 pH Range, Short-Term Cleaning: 1-13 Maximum Feed Silt Density Index: SDI 5 Free Chlorine Tolerance: 0 Related Products for use with M-S2519A-150 Seawater Elements C-C2510-A11 Membrane Cleaning Cartridge with Acid Cleaner to Remove Scale Buildup and Prolong Membrane Life C-C2510-A22 Membrane Cleaning Cartridge with Alkaline Cleaner to Remove Organics and Prolong Membrane Life C-C2510-A88 Membrane Preservative Cartridge for Preserving the System and Membrane During Extended Periods of Non-Operation. 655139-03 Oil Absorbing Filter Cartridge - Oil-Water Separator Replacement Cartridge, 20" Big Blue Pentair Pentek Filter H-F10100CF Plankton Filter - 10" Standard 100 Micron Spun Polypropylene Replacement Filter Cartridge Common Applications for AMI Seawater Watermaker Elements: Seawater Desalination Marine Applications Watermaker RO Systems Yachts Physical Dimensions of M-S2519A-100 Village Marine 33-3001 Replacement Element INCHES (MM) L 19.0 (483) I 15.6 (396) D 2.4 (61) P 0.775 (20) Replacement Compatibility for 2.5 x 19 Seawater RO Membranes AMI 2519 membrane elements are intended to be used as direct replacements for AquaPro 33-3001 Seawater Membrane - for use in any system using these membrane elements. Some common systems using these elements are Parker Racor Village Marine (VMT) Sea Quencher SQ-200 and Little Wonder LWM-180 . These systems are also referred to as part numbers: 90-8549, 90-8561, 90-8550, 90-8512, 90-8596, 90-8516, 90-8515. If you do not see your system listed or wish to learn more about compatibility, please contact us . Our certified water treatment experts will be happy to discuss your application. To ensure prompt and accurate information, please include as much information about your system as possible, such as: model, manufacturer, model of membranes being replaced, any available. product manuals or literature associated with your system, and photographs of your system or membranes.