30 GPM | PRO30 UV Max | NSF Certified UV Water System with LightWise Lamp Dimmer | VIQUA PRO

VIQUA UV Max PRO30 NSF 55 Certified Professional UV Water Sterilizers with LightWise Lamp Dimming Technology Validated with NSF 55 Class A, the VIQUA UV Max PRO 30 offers outstanding UV disinfection performance for commercial applications. Rated for flow rates up to 30 gpm (115 lpm) at 40 mJ/cm². VIQUA’s NSF 55 Class A Professional systems feature flow meter technology for accurate real-time UV dose measurement and reporting, together with a completely redesigned UV sensor for vastly improved reliability. LightWise Lamp Dimming Technology: Dims the lamp under no flow conditions. Benefits include: Ease of Maintenance: Up to 60% less maintenance Reduced internal chamber temperature resulting in decreased sleeve fouling Efficient: Estimated 30% energy savings Click here to learn more about the benefits of LightWise Technology . Benefits of VIQUA UV Max PRO 30 Professional Commercial Ultraviolet Systems: Chemical Free, Economical, and Energy Efficient. Addresses broader range of pathogens than chlorine. (Some protozoa like Cyrptosporidium and Giardia are resistant to chlorination.) Ease of Maintenance: Use the diagnostic system display to troubleshoot, should a problem arise High-performance amalgam UV lamp, reduces maintenance requirements by lasting up to 2 years replacement Reliable: New, market leading flow-meter / UV sensor combination provides real-time UV dose Powerful/Space Saving: Revolutionary Amalgam lamp provides 4x the output of standard output lamps, giving you compact single-lamp systems that are half the size of their predecessors Convenient: Features countdown timer with digital display and audible lamp change reminder for ease of maintenance Cool-Touch fan technology helps reduce the temperature within the chamber to prevent overheating Solenoid Valve – which will stop the flow of water through the chamber should the UV performance fall below a safe level Application: Perfect for a wide range of large homes or light commercial applications including, small businesses, hospitals, dentist offices, etc. Features of UV Max PRO30 UV System: NSF 55 Class A Certified for Disinfection Performance Flow meter UV sensor for real-time UV dose measurement reporting LightWise™ technology to lower lamp power during no flow periods to extend lamp life, reduce sleeve fouling, and lower energy consumption. Cool Touch Fan Sensor reading output (4-20mA) available with cable: 260134 (sold separately) Visual lamp change count down timer audible replacement reminder Audible lamp failure indicator alarm Visual “Power On” LED Dynamic flow restrictor to ensure UV dose of 40 mJ/cm² Inlet solenoid valve Operating pressure: 15 -100 psi (1-6.89 bar) Ambient air temperature: 32-104°F (0-40°C) Influent water temperature: 34-113°F (1-45°C) Installation Orientation: Vertical Only Benefits of UV Disinfection Water Treatment 99.99% destruction of bacteria, virus protozoan cysts (Giardia Lamblia Cryptosporidium) at rated flow Chemical-free Easy to install and service Economical and energy efficient Specifications for Viqua PRO30 UV Max Model: PRO30 Viqua Part Number: 650659 Flow Rate: 30 GPM (113 LPM) at NSF/EPA 40 mJ/cm 2 Certification: NSF/ANSI 55 for Disinfection Performance, Class A Voltage: 100-240v/50-60Hz Power Consumption: 230W Connection: 1-¼" MNPT/ 1" FNTP Combo Dimensions: 4" Dia x 41" L (10cm x 103cm) Max. Operating Pressure: 125 psi (8.62 bar) Ambient Water Temperature: 36-104ºF (2-40°C) Chamber Material: 316L SS Installation: Vertical Only What Size of UV System Do I Need? Choose a UV System with a recommended flow that meets or exceeds your peak flow rate. When in doubt, always choose the next size up. Don't know your flow rate? Visit our Flow Rate Sizing Guide for help. UV Max PRO30 Features Controller: LCD Visual "Power On": YES Visual Lamp Life Remaining: YES Audible Lamp Failure: YES Audible Lamp Replacement Reminder: YES UV Sensor: YES Flow Meter: YES Cool Touch Fan: YES Parts for UV Max PRO30 602856 UV Lamp for Trojan UV Max PRO30 602976 UV Quartz Sleeve for UV Max PRO30 602580 UV Sensor for UV Max PRO30 650709-009 Power Supply for PRO30 Typical Installation of VIQUA UV Max PRO30 Whole-House Ultraviolet Water Treatment System. Vertical Installation is Mandantory About Viqua LightWise Technology VIQUA’s new LightWise™ technology allows the system’s electronic controller to automatically reduce lamp power during periods of no water flow, reducing the rate of sleeve fouling by up to 60%, and providing estimated energy savings of 30% compared to standard PRO systems. By adjusting the lamp power, water temperature is maintained below 40˚C (104˚F), and the rate of sleeve fouling is consequently reduced by as much as 60%. This can more than double the amount of time between cleanings in the sleeve cleaning maintenance cycle. Sleeve Fouling In many situations, the most common problem affecting ultraviolet (UV) water disinfection is the fouling of the quartz sleeve which surrounds the UV lamp. The rate of sleeve fouling is influenced by water temperature, water flow, and water quality – specifically the concentrations of calcium, magnesium, and iron in the water, which are the most common constituents that lead to sleeve fouling. Under no-flow conditions through the UV chamber, the water temperature increases, which causes an accelerated rate of calcium, magnesium, and iron deposits precipitating onto the quartz sleeve. This decreases the level of UV transmittance and eventually requires the sleeve to be cleaned. While actual water usage may vary significantly in a 24-hour period, conditions of no water flow typically account for as much as 60% of the day. During this time, the UV lamp heats the water, resulting in water temperatures as high as 55˚C (131˚F) in the chamber and significantly increasing the rate of sleeve fouling. Viqua's Solution VIQUA’s new LightWise technology allows the controller to reduce lamp power during periods of no water flow, leading to estimated energy savings of 30%. By adjusting the lamp power, water temperature is maintained below 40˚C (104˚F), and the rate of sleeve fouling is consequently reduced by as much as 60%. This can more than double the amount of time between sleeve cleaning cycles. Benefits of LightWise Technology in Ultraviolet Water Treatment Lower maintenance (Up to 60% less maintenance) Decrease conditions that contribute to fouling and corresponding maintenance Increase time period between required maintenance Eliminates the need for a complicated mechanical sleeve cleaning system Lower energy consumption Estimated energy savings of 30% (A typical two unit installation uses 1400 kW/yr) Lower Operating Temperature Water temperature is maintained below 40˚C (104˚F) in no-flow conditions Eliminates the need for hot water purging in no-flow conditions