30 GPM | Monitored | Sterilight Professional Commercial UV Water System with UV Sensor | VIQUA PRO

VIQUA Sterilight VP600M Professional Commercial UV Water Disinfection System As part of the Professional Series, the VP600M offers outstanding UV disinfection performance for commercial applications, for flow rates up to 30 gpm (113 lpm). VP600M features a UV sensor to continually monitor the UV intensity inside the chamber, adding increased assurance of water disinfection at all times. VIQUA Sterilight Professional Series VP600M compact UV disinfection systems provide a reliable, economical, and chemical-free way to safeguard drinking water in commercial, whole house, or a wide variety of other applications. Features of Viqua Sterilight VP600M UV System: Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli, and viruses not visible to the naked eye. User friendly sensor ensures safe UV levels are maintained. Monitored systems have a specialized 254nm UV intensity sensor which notifies homeowner of changes in UV performance. Monitored systems allow for the installation of an optional solenoid valve which will stop the flow of water through the chamber should the UV performance fall below a safe a level. Specially designed and tested high output lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification, and offer superior performance in a wide range of water conditions. The system is easy to maintain and service with easy lamp and quartz sleeve replacement. Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation. Benefits of UV Disinfection 99.99% destruction of bacteria, virus protozoan cysts (Giardia Lamblia Cryptosporidium) at rated flow. Chemical-free Easy to install and service Economical and energy efficient Viqua Sterilight VP600M UV System Controller Model: BA-ICE-CM (click to enlarge) What Size of UV System Do I Need? Choose a UV System with a recommended flow that meets or exceeds your peak flow rate. When in doubt, always choose the next size up. Don't know your flow rate? Visit our Flow Rate Sizing Guide for help. Typical Installation of VIQUA Sterilight Ultraviolet Water Treatment System. (Click to Enlarge) Specifications for VP600M Sterilight Model: VP600M Recommended Flow Rate* 30 GPM (113 LPM) Plug: N. America (NEMA P-15) Voltage: 100-240v/50-60Hz Power Consumption: 78W Connection: 1" MNPT Chamber Dimensions: 3.5" Dia x 30.3" L (8.9 cm x 78 cm) Controller Dimensions: 9.3" x 3.25" x 2.5" (24.1 cm x 8.1 cm x 6.4 cm) Lamp Life: 9,000 Hours Max. Operating Pressure: 125 psi (8.62 bar) Inffluent Water Temperature: 36-104ºF (2-40°C) Chamber Material: 304SS Installation: Vertical or Horizontal** *Factory recommended flow rate is calculated at a UV dose of 30 mj/cm². See manufacturer's specification sheet for flow rates at different doses. **Note: The ideal installation is vertical with the lamp connector on top. This is to prevent water damage from occurring on the lamp pins and lamp connector. VP600M Controller Features Controller: LCD Visual "Power On": YES Visual Lamp Life Remaining: YES Audible Lamp Failure: YES Audible Lamp Replacement Reminder: YES UV Sensor: YES Replacement Parts for VP600M S600RL-HO UV Lamp for Viqua Sterilight VP600M QSO-600 Quartz Sleeve for Viqua Sterilight VP600M BA-ICE-CM Controller for Viqua Sterilight VP600M 254NM-C1 UV Sensor for VP600M Water Quality Parameters: Hardness: 7 grains (120 mg/L) Iron: 0.3 mg/L Tannins: 0.1 mg/L