Electrical Stand

KEY FEATURES Adjustable height width Vertical horizontal installation methods Weight: 67.4lb Removable All-metal construction Locking wheels Only suitable for Lightpath Titan Maximum load capacity: 100 Ibs / 45.5 kg Height is adjustable from 47inches to 56. STEP 1: BASE PART INSTALLATION Install the left and right bracket rods into the base. Use 4 M8*65mm +4 flat screws inserts to lock the whole parts down STEP 2: WHEELS INSTALLATION Press the anti-rotation lock of the universal wheel and install the four wheels on the base STEP 3: LIFTING COLUMNS INSTALLTION Put the cover on the base Put the Lifting Columns on the base Move the cover upwards, and use 4 M8x16mm screws and 4 flat screws to tighten the front and rear screws of the lifting column. Put the cover in original postion Use 2pcs M8x16mm screws and 2pcs flat screws lock the base STEP 4: SUPPORT ROD INSTALLATION Put one support rod into the hole, then use 4M8X16mm screws and flat screws lock it. Rotate 180° and use 4pcs M8x16mm screws and flat screws to assemble the other support rod STEP 5: KEEP THE SUPPORT ROD HORIZONTAL Keep the Support rod horizontal and use M8x16mm screws lock here 06 STEP 6: PANEL AND STAND INSTALLATION Keep the panel flat, use M8X50mm screws and flat screws to align the holes and lock the support rod with the panel. Need two people lift the assembled panel, and another people locks it with 4 M8x50mm screws and flat screws (Ps:The panel is extremely heavy,need 3 people to help here to install to insure the safety ) STEP 7: INSTALL THE POWER SUPPLY AND CONTROLLER IN RIGHT POSTION Align the controller interface, tighten it clockwise, and put the cable into the two cable buckles Powering on after the power cord is plugged into the socket and starting use it now.