100 GPD | High Rejection | 1.8 x 12 | DOW FilmTec RO Membrane

DOW FILMTEC™ TW30-1812-100HR High Rejection Home RO Membrane Element DOW FILMTEC TW30-1812-100HR Elements for home drinking water treatment units produce 100 GPD (16 L/h) of permeate with 98% stabilized salt rejection at standard test conditions. They are shipped dry for convenient handling and long shelf-life. Dow’s next generation elements are a fully compatible replacement for existing DOW FILMTEC residential RO elements. DOW FILMTEC DOW FILMTEC TW30-1812-100HR Elements is FDA – 21 CFR 177.2550; Food and Drug Administration Compliant. Replaces FILMTEC part number TW30-1812-100. Specifications for TW30-1812-100HR FilmTec Part Number: TW30-1812-100HR Replaces TW30-1812-100 Size (Approximate): 1.8" Dia. x 12"L* Flow Rate: 100 gpd (16 lph) Applied Pressure: 50 psig (3.4 bar) Minimum Salt Rejection: 96% Stabilized Salt Rejection: 98% Membrane Type: Polyamide Thin-Film Composite Permeate flow and salt rejection based: 250ppm softened tap water, 77°F, 15% recovery, 50 psig. Operating Limits for TW30-1812-100HR Maximum Operating Temperature: 113°F (45 °C) Maximum Operating Pressure: 300 psig (10 bar) Maximum Feed Flow Rate: 2.0 gpm (7.6 lpm) pH Range, Continuous Operation*: 2-11 Maximum Feed Silt Density Index: 5 Fere Clorine Tolerance**: 0.1ppm *Maximum temperature for continuous operation above pH 10 is 95 ° F **Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure. Related Products for use with TW30-1812-100HR PV2012PME Membrane Housing for use with DOW FilmTec Home RO Membranes F-4ME2QC Elbow Fitting for Home RO Membrane Housing To use a FilmTec membrane in a system with a non-standard housing, simply replace membrane housing (and appropriate plumbing connections) with a standard housing. Benefits of DOW FilmTec Home RO Membranes New advanced membrane chemistry can achieve stabilized salt rejection of 98%. High active membrane area and twin leaf design for optimized performance Robust in high hardness water applications NSF58 safety Certification Fully-automated manufacturing that ensures consistent and high quality elements Shiopped dry for convenient handling and longer shelf-life Proven consistency and reliability for longer membrane life Applications for FilmTec Residential RO Membranes: Under the sink water treatment Point-of-use reverse water treatment systems Production of home drinking water Office Aquariums Institutions Restaurants Ice Makers Labs Point of Use RO System Physical Dimensions of DOW FilmTec TW30-1812-100HR INCHES (MM) A 11.74 (298) B 1.17 (30) C 0.68 (17) D 1.75 (44.5) E 9.4 (239) TW30-1812 Home Drinking Water elements seal at a standard 2.0 inch – 2.05 inch I.D. within pressure vessels