AMI 4.6" x 11" | 1200 GPD | Commercial RO Membrane | Replaces TW30HP-4611

4.6" x 11" Reverse Osmosis Membrane | Tap or Brackish Water | 1200 GPD RO Membrane Replacement Membrane for DOW FilmTec TW30HP-4611 AMI 4.6.x 11 elements are intended to replace DOW FilmTec TW30HP-4611 membrane elements to produce high quality water from tap or brackish water. The full-fit design of these elements makes them suitable for sanitary applications. AMI Membranes are 100% Quality and Performance Tested in their ISO 9001:2015 Certified Facilities. Specifications for M-T4611A AMI Part Number: M-T4611A Membrane Size (Nominal): 4.6 x 11 Membrane Dimensions: 4.61"Dia. x 11.3"L Product Flow Rate: 1,200 GPD (4.54 m 3 /d) Applied Pressure: 225 psi (15.5 bar) Stabilized Salt Rejection: 99.0% Outer Wrap: FRP Wrapped Membrane Type: Tap or Brackish Water Membrane Sheet: TFC (Thin Film Composite) Element Type: Spiral Wound Feed Water Test Temperature: 77°F (25°C) Single Element Recovery: 5% Chlorine Tolerance: 0.1 ppm Feed water pH Range: 2-11 Manufacturer: Applied Membranes, Inc. Country of Manufacture: United States (USA) Replaces Membranes: DOW TW30HP-4611 FilmTec TW30HP-4611 DuPont TW30HP-4611 Note: Performance specifications based on 2,000 mg/l sodium chloride, 225 psi (1.6 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%. Features of AMI Tap Water / Brackish Water RO Membranes High Rejection Flow Rate Manufactured in our ISO 9001:2015 Certified Facilities 100% Performance and Quality Tested Backed by our Experienced Technical Support Staff High Quality for Consistent and Reliable Performance Uses the most advanced membrane film technology and manufacturing processes Full-Fit Design Applications for AMI Commercial RO Membranes Medical Applications Physical Dimensions of M-T4611A: Total Length (A): 11.32 In. (287.53 mm) Outer Diameter (B): 4.61 In. (117 mm) PWT Inner Diameter (C): 0.75 In. (19 mm)