3GPD Chemical Injection System with Tank Level Monitor & RO System Control | Antiscalant Injection

Chemical Injection System for Commercial Reverse Osmosis Water Treatment Systems Injection System for up to 3 Gallons per Day Antiscalant, Chlorine, Acid, or Other Water Treatment Chemicals for RO, NF, UF, or MF Membrane System Pre-Treatment or Post-Treatment AMI A540L-220-3GPD Chemical Injection System will inject up to 3 Gallons Per Day of accurate metered chemical injection into a water stream. Ideal for antiscalant injection for commercial RO pretreatment, and typically used in systems with feed flow rates between 5 gpm to 50 gpm, depending on the chemical concentration required. AMI 3GPD Chemical Injection System has Tank Level Float Installed for Automatic Operation The complete chemical injection assembly is equipped with everything needed for automatic operation including an adjustable metering pump, polyethylene chemical tank, suction and discharge lines fittings, and a level switch to monitor the level of chemical in the tank and automatically shut-down the system when it reaches the pre-set point. This chemical metering pump includes a detachable motor, feed rate control and pump head featuring a 3-point roller design acts as check valve to prevent back flow or loss of prime. The polyethylene construction is both lightweight and rugged. The tank has incremental solution level indicators and is equipped with a child-resistant lid. The pumps are vertically mounted over the tank containment basin. This system comes pre-assembled for quick and easy installation. The adjustable metering pump has 11 different levels ranging from 0.2 to 3 gallons of chemicals dosed per day. AMI Chemical Injection Systems are in our ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested. AMI 3GPD Chemical Injection System Dosing Settings Setting L = 0.2 Gallons per Day Setting 1 = 0.3 Gallons per Day Setting 2 = 0.6 Gallons per Day Setting 3 = 0.9 Gallons per Day Setting 4 = 1.2 Gallons per Day Setting 5 = 1.5 Gallons per Day Setting 6 = 1.8 Gallons per Day Setting 7 = 2.1 Gallons per Day Setting 8 = 2.4 Gallons per Day Setting 9 = 2.7 Gallons per Day Setting 10 = 3.0 Gallons per Day Features Benefits of AMI Chemical Injection Systems Adjustable Metering Pump for Accurate Chemical Dosing Polyethylene Chemical Tank for Maximum Chemical Compatibility Chemical Tank Float Tree Assembly and Level Switch to Automatically Shut Down System when Chemical Tank is Empty Made with FDA and NSF Listed Materials 220v, 50/60Hz - Equipped with NEMA 6-15 Plug A540L-220-3GPD Specifications Part Number: A540L-220-3GPD Alternate Part #'s: Stenner S1N45MJH1B1S Chemical Dose Capacity: 0.2 to 3 Gallons per Day Chemical Tank Capacity: 15 Gallons Voltage Rating: 220v, 50/60Hz Power Supply: 3-Prong Plug NEMA 6-15 Chemical Tank Material: Polyethylene Pump Housing Material: Polycarbonate Pump Tube: Santoprene or Versilon Check Valve Duck Bill: Santoprene or Pellethane Suction/Discharge Tubing: Polyethylene Suction Line Strainer: PVC or Polypropylene (NSF listed) All Fasteners: Stainless Steel Tube and Injection Fittings: PVC or Polypropylene (NSF listed) Connecting Nuts: PVC or Polypropylene (NSF listed) Dimensions (HxW): 26" x 21" Weight: 19lbs Applications for AMI 3 GPD Chemical Injection System Antiscalant Injection Chlorine Injection Acid Injection Chemical Injection RO System Pre-Treatment Water Treatment Restaurants Aquariums Agriculture Hydroponics Cannabis Labs Drinking Water Beverages Ice Makers Wide Variety of Other Applications