2.5" x 21" | 365 GPD | 100 PSI | AMI XLE Extra-Low Energy RO Membrane

2.5" x 21" Extra-Low Energy Reverse Osmosis Membrane | Tap or Brackish Water | 365 GPD at 100 PSI AMI Extra-Low Energy (Low Pressure) XLE RO Membrane elements are specially designed to run at 100 psi while producing similar product flow as standard elements at higher pressures. By using these elements in your commercial reverse osmosis system, you can significantly reduce your operating costs in tapwater and brackish water applications. AMI XLE Extra-Low Energy RO membrane elements produce high quality water from tap or brackish water in small commercial RO systems, and are among the finest in the industry. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting performance, making AMI Membranes the natural choice for use in small commercial RO systems. AMI Low Energy Commercial RO Membranes are constructed of low pressure tap water TFC (thin film composite) membrane material and fit standard PVC and Stainless Steel RO Membrane Housings. AMI Membranes are 100% Quality and Performance Tested in their ISO 9001:2015 Certified Facilities. M-T2521AXLE Specifications AMI Part Number: M-T2521AXLE Membrane Size (Nominal): 2.5 x 21 Membrane Dimensions: 2.5"Dia. x 21"L Flow Rate: 365 GPD (1,382 LPD) Applied Pressure: 100 psi (0.7 MPa) Stabilized Salt Rejection: 99% For Housing: Standard 2.5" x 21" Outer Wrap: Tape Wrapped Membrane Type: Tap or Brackish Water Membrane Sheet: TFC (Thin Film Composite) Element Type: Spiral Wound Feed Water Test Temperature: 77°F (25°C) Single Element Recovery: 8% Chlorine Tolerance: 0 Feed water pH Range: 2-11 Can Replace: DuPont DOW FilmTec XLE-2521 154530 Axeon HF4-2521 Manufacturer: Applied Membranes, Inc. Country of Manufacture: United States (USA) Note: Performance specifications based on 500 mg/l sodium chloride, 100 psi (0.7 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%. Caution: Do not run these membranes at a pressure that will produce more than their rated product flow rate. This will lead to premature fouling of the membrane resulting in drop in permeate flow and higher TDS of the permeate. Features of AMI XLE Low Pressure Tap Water / Brackish Water RO Membranes Reduce operating costs and wear and tear on your system by running your system at a lower pressure. High Rejection Flow Rate Manufactured in our ISO 9001:2015 Certified Facilities 100% Performance and Quality Tested Backed by our Experienced Technical Support Staff High Quality for Consistent and Reliable Performance Uses the most advanced membrane film technology and manufacturing processes Standard dimensions to fit in commonly available housings Applications for AMI XLE Low Pressure RO Membranes Restaurants Aquariums Whole House (Residential) Office Institutions Hotels Hospitals Disaster Relief Spot Free Rinse/Car Wash Labs Pharmaceutical Humidification Misting Manufacturing Rinse Water Bottled Water Water stores Beverage Food Processing Ice Makers Commercial Water Treatment Ice Makers Tap Water Brackish Water Wide Variety of Other Applications Physical Dimensions of M-T2521AXLE: Total Length (L): 21 In. (53.3 cm) Membrane Length (I): 19 In. (48 cm) Diameter (D): 2.5 In. (6.4 cm) PWT (P): 0.75 In (1.9 cm) Replacement Compatibility for AMI 2.5 X 21 XLE RO MEMBRANES Applied Membranes M-T2521AXLE extra-low energy membrane elements can be used as direct replacement for many industry-standard 25x21 size lultraow pressure RO elements with 3/4" male product water tubes ("stinger style") which are rated at 100psi. These include DuPont DOW FilmTec XLE-2521, 154530 and Axeon HF4-2521 200387. If you do not see your membrane listed or wish to learn more about compatibility, please contact us . Our certified water treatment experts will be happy to discuss your application. To ensure prompt and accurate information, please include as much information about your system as possible, such as: model, manufacturer, model of membranes being replaced, any available. product manuals or literature associated with your system, and photographs of your system or membranes.